Ads

MCQ based on DC Circuit

1-The nucleus of an atom consists of
  1. Protons
  2. Neutrons
  3. Protons and Neutrons
  4. Electrons and Protons
(Ans: c)

2-A body contains electrons more than its normal number has
  1. +ve charge
  2. –ve charge
  3. No charge
  4. None of the above
(Ans: b)

3-The SI unit for measurement of electric charge is
  1. volt
  2. columb
  3. ohm
  4. farad
(Ans: b)

4-One columb is approximately equal to
  1. 624 x 10^12
  2. 624 x 10^14
  3. 624 x 10^16
  4. 624 x 10^18
(Ans: c)

5-The ____ is responsible for the current to flow in a closed circuit.
  1. Electric charge
  2. Potential difference
  3. Resistance
  4. All of the above
(Ans: b)

6-Any charged conductor, which receives electricity from the earth, when connected to it, is said to be
  1. Zero potential
  2. –ve potential
  3. +ve potential
  4. None of the above
(Ans: b)

7-Resistance of a wire is directly proportional to its
  1. Length
  2. Diameter
  3. Area of cross section
  4. All of the above
(Ans: a)

8-Reciprocal of resistance is called
  1. Resistivity
  2. Conductance
  3. Resonance
  4. None of the above
(Ans: b)

9-A coil consists of 8 turns of copper wire have cross section area of 1mm^2. The resistance of the coil, when mean length per turn is 0.02μΩm, is
  1. 0.96 ohm
  2. 0.48 ohm
  3. 1.82 ohm
  4. 1.44 ohm
(Ans: a)

10-The following is (are) the semiconductor(s)

  1. Silicon
  2. Germanium
  3. Carbon
  4. All of the above
(Ans: d)
11-The resistance of pure metallic conductor _____ with the _______ in temperature.
  1. increases, increase
  2. increases, decrease
  3. remains same, increase
  4. remains same, decrease
(Ans: a)

12-One kilowatt equals to _____ horse power.
  1. 1.26
  2. 1.36
  3. 1.46
  4. 1.56
(Ans: b)

13-The output of motor in watts when it takes a power of 3kw and its efficiency is 75%, is
  1. 2000
  2. 2250
  3. 2500
  4. 2750
(Ans: b)

14-If three resistance (R1, R2 & R3) are connected in series then
  1. V = IR1 + IR2 + IR3
  2. V = I/R1 + I/R2 + I/R3
  3. I = VR1 + VR2 + VR3
  4. I = V/R1 + V/R2 + V/R3
Where V=Potential difference, I=Current
(Ans: a)

15-When the resistances are connected in parallel circuit then
  1. branch currents are additive
  2. conductances are additive
  3. powers are additive
  4. All of the above


  (Ans: d)   

Post a Comment

0 Comments